Amplifiers from McIntosh and Bryston are often compared to see which one is better. The reason is that these two companies are known for making high-end audio equipment that is very similar to what the other company makes. Aside from that, they are both known for making very expensive products. But even though their products, features, and prices may look similar, there are still some things that set them apart.

One difference is where they came from. McIntosh is owned by the American company McIntosh Group. Bryston, on the other hand, is a Canadian company that is owned by the American company BPE incorporated. There is also a difference in how well each amplifier works. The sound from McIntosh amplifiers is warmer and better. Bryston amplifiers, on the other hand, are known for their high-end and dynamic sound support.

There are a few other things that can easily change your mind about which one to buy. Keep reading until the end of this article to find out some of the things that can help you tell them apart.

Why is it Important to Make This Comparison?

  1. The price of these two brands is pretty high on the market, so that may not be a good way to tell which is better.
  2. Mac tests with some equipment from Bryston, which could lead people to think that the two companies are the same.
  3. Some people might choose one over the other just based on where it came from, without knowing anything else about it.
  4. Both McIntosh and Bryston use solid-state class A/B power supplies, which makes it hard to choose between the two.


In general, the amplifiers made by both companies are quite pricey. But both McIntosh and Bryston make amplifiers that might be better for other budgets, but that’s just my opinion.

For instance, a basic 2-channel stereo amp from McIntosh costs $3200 CAD, but the same type from Bryston only costs $600 CAD.

But high-end mono amps from McIntosh cost about $20,500 CAD, while those from Bryston cost about $22,000. So, it depends on what you want to know which brand has the better price for it.


McIntosh amplifiers have a case that looks like a brick house but has fewer hex screws and an amazing body finish.

On the other hand, Bryston amplifiers have a body shape that is almost the same as McIntosh. On either side, though, there are large hex screws that hold them together better.

cooling system

As a general rule, you should put an amplifier near something that cools the air, like an air conditioner or fan.

Internally, Bryston amplifiers have a fan that helps cool them down. On the other hand, McIntosh is made with a natural convection system that makes it easy to get rid of hot air.


Most McIntosh amplifiers don’t come with a remote control, but you can buy one for your amp for about $500 if you want to.

Bryston amps, on the other hand, are much easier to use because they come with a remote control.


McIntosh amps don’t have RCA inputs. Instead, they only work with XLR inputs. Bryston amps, on the other hand, have a lot of compatible audio inputs.

Bryston 4B3 vs. McIntosh Mac C2

Power compatibility is one of the biggest differences. It is said that the Mac C62 can handle up to 70 watts of power, but it has been said that it clips before it gets to that level.

This can cause the sound to be distorted and muffled. The Bryston 4b3 amp, on the other hand, can only handle up to 30 watts of power effectively.

When used with a separate class A/B amp, the McIntosh Mac C62 can handle up to 125 watts of power, which is more than other amps in this class can handle. But it needs to be done carefully so that the speakers and other audio devices don’t get broken.

McIntosh MA6900 vs. Bryston BP26

First of all, you should know that these two are not even the same. The MA6900 is a preamp, while the BP26 is an integrated amplifier. But this is only the main difference; there are other things to think about as well.

The high-tech SOTA vacuum tube gives the Bryston BP26 high-quality sound. It also has two pairs of speaker outputs and 7 input ports, one of which is balanced.

But this integrated amp has a heatsink for a chassis that weighs about 60 pounds. Well, that means that when it runs, it is more likely to make a lot of heat. This might not be the best thing to use in a small room, since it can quickly fill the room with noise.

The Bryston BP26 is 17 inches wide, 11 inches tall, and 4 inches deep. It weighs about 12.7 pounds.

Which is better: the Bryston BP26 or the McIntosh MA6900?

Which of these two you choose will depend on what you want from an amp. For example, the Bryston BP26 has input and power output features that are much better than those of the McIntosh Ma6900.

On the other hand, if you care most about how it looks and how much it weighs, the MA6900 is your best option.

Why do McIntosh and Bryston amplifiers cost so much?

Most of the expensive parts in these amps are from other countries, which is why they cost so much.

For example, McIntosh amplifiers use transformer parts that are made in the UK and the USA and then shipped to China. Some of the things that make the price go up are the cost of shipping and buying the item. But Bryston amplifiers are still more expensive.

When you look at how well they work, you can see that they are worth the money. But even if the cheap amp isn’t as good as the expensive one, most people would still choose it.


Both McIntosh and Bryston amplifiers are sure to give you the sound quality you want from an amp. But if cost is your main concern, the McIntosh amplifier is the best choice. But if you don’t mind spending an extra dollar on something you like, Bryston’s design and features will also be worth it.

Check out our guide on Mark Levinson vs. McIntosh Amplifiers to learn more about how McIntosh amps compare.

Check out our guide on Lepy vs. Lepai if you want to learn more about cheaper amps.


Recent Posts